Acura RDX 2019 Owner's Manual page 95

Indicator Name
Road
Departure
Mitigation
(RDM) Indicator
Collision
Mitigation
Braking
System TM
(CMBS TM )
Indicator
On/Blinking
Comes on when RDM shuts itself
●
off.
Comes on when you deactivate the
●
CMBS TM . A multi-information
display message appears for five
seconds.
Comes on if there is a problem with
●
CMBS TM .
Indicator may come on temporarily
●
when the Maximum Load Limit is
exceeded.
Explanation
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 483
Stays on constantly without the
●
CMBS TM OFF - Have your vehicle checked
by a dealer.
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 401
Stays on constantly - Have your vehicle
●
checked by a dealer.
uuIndicatorsu
Message
Continued 93