Acura RDX 2019 Owner's Manual page 183

■
Using the Panoramic Roof Switch
Open
Tilt
Close
■
Automatic operation
To open: Pull the switch back firmly.
To close: Push the switch forward firmly.
The panoramic roof will automatically open or
close all the way. To stop the panoramic roof
midway, push the switch briefly.
■
Manual operation
To open: Pull the switch back lightly, and
hold it until the desired position is reached.
To close: Push the switch forward lightly, and
hold it until the desired position is reached.
■
Tilting the panoramic roof up
To tilt: Push on the center of the panoramic
roof switch.
The sunshade will open automatically
u
and the panoramic roof will start to tilt
up.
To close: Push the switch forward firmly, then
release.
1Using the Panoramic Roof Switch
Comfort Position
Full Open Position
The panoramic roof cannot be fully opened in a
single operation. The panoramic roof has a
"comfort" position or wind noise reduction position
at which the roof first stops. To open fully, pull the
switch back again after the roof has stopped at this
position.
Whenever the panoramic roof is opening, the
sunshade moves along with it. However, when the
panoramic roof is closing, the sunshade does not
move.
When you tilt open the panoramic roof, the sunshade
opens slightly to let in fresh air. When you close the
panoramic roof from this position, the sunshade
returns to its closed position.
uuPanoramic Roofu
181