Acura RDX 2019 Owner's Manual page 94

uuIndicatorsu
Indicator Name
Road
Departure
Mitigation
(RDM) Indicator
92
On/Blinking
Comes on if there is a problem with
●
RDM.
Indicator may come on temporarily
●
when the Maximum Load Limit is
exceeded.
Comes on when RDM shuts itself
●
off.
Explanation
Stays on constantly - Have your vehicle
●
checked by a dealer.
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 401
Stays on constantly - Have your vehicle
●
checked by a dealer.
Indicator may come on temporarily when
●
passing through an enclosed space, such
as tunnel.
The area around the radar sensor is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you have cleaned the radar sensor.
2 Radar Sensor P. 485
Stays on - The temperature inside the
●
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
2 Front Sensor Camera P. 483
Message