Back Panel - TP-Link TL-MR100 User Manual

Chapter 1
Name
(Wi-Fi)
(LAN)
(Signal Strength)
Note:
1. If the Internet LED is off, please check your internet connection first. Refer to
4G LTE Router for more information about how to make internet connection correctly. If you
have already made a right connection, please contact your ISP to make sure your internet
service is available now.
2. If the Signal Strength LED is off, please check your Internet LED first. If your Internet LED
is also off, please refer to Note 1. If your Internet LED is on, please relocate the router to a
location where it can receive a strong mobile internet signal, such as near a window.
1 2 2

Back Panel

The following parts (view from left to right) are located on the rear panel.
Status
On The wireless function is enabled.
Flashing WPS connection is in progress. This may take up to 2 minutes.
Off The wireless function is disabled.
On At least one LAN port is connected to a powered-on device.
No LAN port is connected to a powered-on device or the LAN port is
Off
not connected properly.
Indicates the signal strength the router received from the mobile
On
internet. More lit bars indicate a better signal strength
Off There is no mobile internet signal.
Get to Know Your 4G LTE Router
Indication
.
Connect Your
4