TP-Link TL-MR100 User Manual page 12

Chapter 2
Power adapter
c. Connect the
power adapter
to the router.
4 Connect your computer to the router.
Method 1: Wired
Connect your computer's Ethernet port to the LAN port on the router via an Ethernet
cable.
Method 2: Wirelessly
Use the default SSID (Wireless Network Name) and Wireless Password printed on the
product label of the router to connect wirelessly.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device's screen.
2 ) Immediately press the WPS button on your router.
3 ) The WPS LED flashes for about 2 minutes during the WPS process.
4 ) When the WPS LED is on, the client device has successfully connected to the
router.
Connect the Hardware
a. Install the antennas and
position them upwards.
b. With the gold contacts
facing down, insert the
nano SIM card into the
slot until you hear a click.
8