Setting Up Scheduled Or Manual Recording - Lorex D841 Series User Manual

8 Recording
2. Click STORAGE. Click the SCHEDULE tab on the side panel, then Record on the top panel.
3. Under Channel, select the channel you would like to configure or select All.
4. Configure the schedule as needed:
• Check Continuous, MD (Motion Detection), or Alarm to select the recording type you
would like to configure.
• Click-and-drag on each day to customize the recording schedule. The schedule is set up as
a grid, which each block representing one hour.
• Click beside 2 or more days to link schedules (
change multiple schedules at once.
• To make fine adjustments to a schedule, click
and end times for a schedule.
• To disable all recording of the selected type on the selected day, click
5. Click Apply.
6. (OPTIONAL) Click Copy to apply the settings for the current channel to one or more other
channels (see 14.11 Copying Settings to Another Channel, page 79 for full instructions on us-
ing the copy function).

8.4 Setting up Scheduled or Manual Recording

You can set the system to record based on a schedule or you can manually turn recording on and
off. By default, the system is set to always record on a schedule.
To configure the recording schedule, see 8.3 Setting the Recording Schedule, page 19.
#LX400111; r. 1.0/55872/56018; en-US
). This allows you to quickly
. This will allow you to set exact start
.
20