Honda DREAM YUGA Owner's Manual page 65

2. Swing arm bearings - this can be checked
by pushing hard against the side of
the rear wheel while the vehicle is
on a Center stand. Freeplay indicates
worn bearings.
3. Carefully inspect all front and rear
suspension fasteners for tightness.
SIDE STAND
Refer to the Safety Precautions on
Check the side stand spring (1) for damage
and loss of tension, and the side stand
assembly for freedom of movement.
(1) Side stand spring
Honda Motorcycle & Scooter India Pvt. Ltd.
page 37.
(1)
¼lkbM LVS U M fLiz a x ½
If the side stand is squeaky or stiff, clean
the pivot area and lubricate the
with clean engine oil.
WHEEL REMOVAL
Refer to the Safety Precautions on
Front Wheel Removal
1. Place the vehicle on its center stand.
2. Raise the front wheel off the ground
by placing a support block under the
engine.
3. Remove the speedometer cable (1) by
pushing the tab (2).
4. Remove the front brake adjusting nut
(3) and remove the front brake cable
(4) from the brake arm (5).
5. Remove the front axle nut (6).
6. Remove the front axle shaft (7) and the
wheel.
pivot bolt
page 37.
57