Honda DREAM YUGA Owner's Manual page 64

damaged rollers, loose fitting links or
otherwise appears unserviceable.
3. Inspect the sprocket teeth for possible
wear or damage. Replace if necessary.
Never use a new drive chain on badly
worn sprockets.
sprockets must be in good condition, or
the new replacement chain or sprocket
will wear rapidly.
4. Lubricate the drive chain (page 55).
5. Pass the chain over the sprockets and
join the ends of the chain with the
master link. For ease of assembly,
hold the chain ends against adjacent
rear sprocket teeth while inserting the
master link.
The master link is the most critical part
affecting the security of the drive chain.
Master links are reusable, if they
remain in excellent condition, but it
is recommended that a new master link
retaining clip be installed whenever the
drive chain is reassembled.
Install the master link retaining clip so
56
Both chain and
that the closed end of the clip will face
the direction of forward wheel rotation.
6. Adjust the drive chain (page 54) and
rear brake pedal free play.
7. Install the drive chain cases.
(1) Retaining Clip ¼fjVs f ua x fDyi½
FRONT AND REAR SUSPENSION
INSPECTION
Refer to the Safety Precautions on
1. Check the front fork assembly by
locking the front brake and pumping the
fork up and down vigorously. Suspension
action should be smooth and there must
be no oil leakage.
Honda Motorcycle & Scooter India Pvt. Ltd.
(1)
page 37.