Honda DREAM YUGA Owner's Manual page 52

Please dispose of used engine oil in a manner
that is compatible with the environment. We
suggest you take it in a sealed container to
your local recycling center or service station
for reclamation. Do not throw it in the trash
or pour it on the ground or down a drain.
Used engine oil may cause skin cancer if
repeatedly left in contact with the skin for
prolonged periods. Although this is unlikely
unless you handle used oil on a daily basis,
NOTICE
Always use Honda genuine engine oil.
It is still advisable to thoroughly wash
your hands with soap and water as soon
as possible after handling used oil.
If a torque wrench is not used for this
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Change the engine oil from the engine
at normal operating
the vehicle on its center stand to assure
complete and rapid draining.
44
temperature and
1. To drain the oil, remove the oil filler cap/
dipstick and oil drain bolt (1) and sealing
washer (2).
2. Operate the kickstarter several times to
aid in complete draining of the remaining
oil.
3. Check that the sealing washer (2) on the
drain bolt is in good condition and install
the bolt. Replace the sealing washer every
other time the oil is changed, or each
time if necessary.
Oil Drain Bolt Torque:
24 N.m (2.4 kgf.m, 17 Ibf.ft)
4. Fill the crankcase with recommended
grade oil; approximately:
0.9 ltr. (0.9 US qt, 0.8 Imp qt)
5. Install the oil filler cap/dipstick.
6. Start the engine and let it idle for 3-5
minutes.
Honda Motorcycle & Scooter India Pvt. Ltd.