Sharp AQUOS 4T-C50AH1X Operation Manual page 75

Hide thumbs Also See for AQUOS 4T-C50AH1X:

Initial setup manual (6 pages)

Table of Contents

Using the Internet

Connecting to the Internet (Continue)

NOTE

A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for

setup.

If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case,

disable the stealth mode on the access point.

A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable.

Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.

Please follow the legislation in your country when using the wireless LAN outdoors.

If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press

connected TV feature to make changes to the network settings.

If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.

You cannot configure the settings from "

configure your "Network" settings, press the

(HOME)" > "Settings" > "Menu" > "Smart TV" > "Internet Setup" while using an application. If you must

(HOME) key to exit the function.

EN 8-3