Sharp AQUOS 4T-C50AH1X Operation Manual page 53

<< On-Screen Display Menu
Example
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
System options (Continue)
View option (Continue)
4:3 mode (DTV and HDMI only)
The 4:3 mode allows you to select between
"Normal" and "Full".
Normal: Normal range keeping 4:3 or 16:9
aspect ratio.
Full: Wide image without side bars.
Auto wide (DTV only)
The "Auto wide" allows the TV to switch
automatically among the different picture size.
(Off, On)
NOTE
Use "Wide mode" if an image does not
switch to the appropriate picture size. When
the broadcast signal contains no aspect
ratio information, the function will not work
even if enabled.
EN 4-32
Change audio
MPX
Allows you to change the audio when multiple
audio is available for the programme you are
watching. (Auto, Mono)
NOTE
You can change Audio by pressing
AD/MPX on the remote control unit.
See page 3-4 for details of Audio function.
Bilingual
Select from among 3 kinds of mode: DUAL I,
DUAL II and DUAL I + II.
>>