Sharp AQUOS 4T-C50AH1X Operation Manual page 70

<< Using a PC
Control of the TV (Continue)
CONTROL ITEM COMMAND
CHANNEL CH UP C H U P
CH DOWN C H D W
DEVICE NAME T V N M
MODEL NAME M N R D
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
PARAMETER CONTROL CONTENTS
_ _ _ _ The channel If it is not TV
number of TV display, it will
+1 input-switch to
TV. (same
function as CH
)
_ _ _ _ The channel If it is not TV
number of TV display, it will
-1 input-switch to
TV. (same
function as CH
)
1 _ _ _ The device
name set in
"Device Name"
is displayed.
1 _ _ _ The model
name of the TV.
CONTROL ITEM COMMAND
SOFTWARE S W V N
VERSION
IP PROTOCOL I P P V
VERSION
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in brackets
under CONTROL CONTENTS.
Any numerical value can replace the "x" on the table.
EN 7-5
PARAMETER CONTROL CONTENTS
1 _ _ _ The current version
of the TV software
is displayed.
1 _ _ _ The currently
supported version
of IP protocol is
displayed.
>>