Sharp AQUOS 4T-C50AH1X Operation Manual page 67

<< Using a PC
Control of the TV (Continue)
Command format
Eight ASCII codes +CR
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0-9, x, blank, ?
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the
remainder. (Be sure that 4 values are input for the parameter.)
When the input parameter is not within an adjustable range, "ERR" returns.
(Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
Response code format
Normal response
Problem response
(communication error or incorrect command)
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Command table
Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND
POWER SETTING P O W
INPUT TOGGLE I T G
SELECTION
TV I T V
0-4 I A V
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in brackets
under CONTROL CONTENTS.
Any numerical value can replace the "x" on the table.
EN 7-2
PARAMETER CONTROL CONTENTS
R 0 _ _ _ Power Off It shifts to
standby.
1 _ _ _ Power On Power On
D _ _ _ _ (Toggle) It input-
switches by
the toggle.
(It is the
same as an
input change
key)
D _ _ _ _ It input-
switches to
TV. (A
channel
remains as it
is. (Last
memory))
D * _ _ _ 0: TV,
1: HDMI 1,
2: HDMI 2,
3: VIDEO IN,
4: USB
>>