Sharp AQUOS 4T-C50AH1X Operation Manual page 47

<< On-Screen Display Menu
Example
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Smart TV (Continue)
Bluetooth setup
Bluetooth
This feature enable a TV to connect with other
Bluetooth devices via Bluetooth connection.
Off: "Paired devices" and "Add accessory"
does not work when Bluetooth is set to
"Off".
On: Bluetooth function is on.
NOTE
When you use the Bluetooth device with
your TV for the first time, you must make
pairing between the device and the TV (Add
accessory). Once the pairing is correctly
carried out, the Bluetooth device will be
registered on the TV (Paired devices).
Connectivity and reception range may
depend on condition, environment and
distance of Bluetooth devices.
Sound quality and compatibility are depend
on Bluetooth devices.
The Bluetooth format only supports HID,
A2DP and AVRCP.
Paired devices
You can pair, unpair or forget the device for
Bluetooth devices.
EN 4-26
Add accessory
The TV will start searching list of Bluetooth
devices.
NOTE
Before pairing operation between devices
and TV is completed, enter the PIN code by
using the software keyboard (If necessary).
When audio output device is connected, you
can set the "Speaker type" between
"External speaker" and "Subwoofer".
- External speaker: Audio output at
external speaker only. During this setting,
"Audio settings" of TV are no available.
- Subwoofer: Audio output at TV speaker
and Subwoofer. User can change
Subwoofer behaviour suit the user
preference (Bass, Audio delay).
Lip sync error may occur depends on
Bluetooth device and signal source.
RECOMMENDATION
We recommended you to use CP-SW60A1
SHARP Subwoofer to get better
performance.
>>