Husqvarna LG 400 Operator's Manual page 19

To replace the oil in the eccentric
element
1. Remove the oil drain plug for the eccentric element
and connect a hose.
2. Tilt the product to drain the oil.
Note: You can also use a manual oil drain pump to
drain the oil in the eccentric element.
1224 - 002 - 06.04.2020
3. Clean the surfaces around the hole for the oil drain
plug, the threads of the hole and the oil drain plug.
Use a dry cloth and, if it is necessary, an applicable
solvent.
CAUTION: Do not use water to clean
around and on the oil drain plug.
4. Fill the eccentric element with oil of the correct type.
Technical data on page 22 .
Refer to
5. Install the oil drain plug.
To do a check of the battery
1. Disconnect the battery cables (A).
A
B
C
2. Examine the battery for damages (B). Replace the
battery if it is damaged.
3. Clean the battery terminals (C).
4. Connect the battery cables.
To charge the battery
• If the battery is not used for a long period of time,
charge it fully before you use it.
A
C
19