Husqvarna LG 400 Operator's Manual page 11

To start the product (LG 400, Honda)
1. Open the fuel valve.
2. Set the throttle control to idle speed.
3. Set the choke control in the correct position.
a) If the engine is cold, close the choke.
b) If the engine is warm or the ambient temperature
is high, open the choke.
4. Set the engine ON/OFF switch to ON.
1224 - 002 - 06.04.2020
5. Pull the starter rope handle slowly until you feel
resistance.
6. Release the starter rope handle to let the starter
rope go back.
7. Pull the starter rope handle until the engine starts.
8. Open the choke control gradually until it is fully open.
9. Let the engine operate at idle speed for 2–3 minutes.
10. Set the throttle control to full throttle.
To stop the product (Honda)
1. Set the throttle control to idle speed.
2. Let the engine operate at idle speed for 2–3 minutes.
11