Husqvarna LG 400 Operator's Manual page 12

3. Set the engine ON/OFF switch to OFF. The engine
stops.
4. Move the fuel valve to the OFF position.
To start the product (LG 400, Lombardini)
1. Set the throttle control to idle speed.
2. Turn the ignition key to the ignition position (A). The
indicators for battery charge and oil pressure come
on (B).
12
B
A
3. Turn the ignition key to the start position (C).
a) When the engine starts, immediately release the
ignition key. The ignition key goes to neutral
position.
b) If the engine does not start in 10 seconds,
release the ignition key and wait 5 seconds
before you try again.
4. Let the engine operate at idle speed for 2–3 minutes.
5. Set the throttle control to full throttle.
To stop the product (LG 400, Lombardini)
1. Park the product on level ground.
2. Set the throttle control to idle speed.
3. Let the engine operate at idle speed for 2–3 minutes.
C
1224 - 002 - 06.04.2020