Gpi Connector; Tally Connector - Datavideo SE-1000 Instruction Manual

GPI Connector

The GPI (General Purpose Interface) Connecter allows for a simple remote control to be added to the SE-
1000. A simple push button will emulate the Auto Button. Each time the button is pressed the SE-1000 will
perform whatever transition is set.
The GPI is a 3.5mm Jack Socket, and wiring a remote is very simple.
Tally Socket
The Tally Socket provides status information for input channels 1 to 6.
The Datavideo TB-10 can translate this data and provide tally light information for the
Datavideo TLM 433 monitors or the ITC-100 Talkback system.
See Useful Accessories for more details of the TLM 433 / ITC-100 / TB-10
The data format is as follows:
Pin No. Signal Name
1 Input 1
2 Input 2
3 Input 3
4 Input 4
5 Input 5
6 Input 6
7 Enable
8 Alarm
9 Ground
Input / Output Type
Open Collector Output
Open Collector Output
Open Collector Output
Open Collector Output
Open Collector Output
Open Collector Output
Input
Open Collector Output
Ground
62
Description of Signal
Tally Output - Video Input 1
Tally Output - Video Input 2
Tally Output - Video Input 3
Tally Output - Video Input 4
Tally Output - Video Input 5
Tally Output _ Video Input 6 (DVI)
Enable Signal of Tally Output
Open: Active Closed: Inactive
Fan Alarm / PSU Alarm Output
Ground