HP EliteOne 1000 G2 Hardware Reference Manual page 36

4. Grasp the top of the rear panel on the monitor head at the webcam slot and pull the panel off the
monitor head at the connection points (1), and then slide the rear cover down the neck of the stand (2).
5. Remove the screws from the webcam blank (1), and then slide the blank back to remove it from the
monitor head (2).
6. Snap the rear panel onto the monitor head.
7. Insert the new webcam into the webcam slot on the monitor head and press the webcam down so that it
engages the internal latches.
8. Reconnect the power cord and any external devices, and then turn on the computer.
30 Chapter 3 Hardware repair and upgrade