Connecting To A Switchboard - BT Synergy 2150 User Manual

Connecting to a switchboard

When connecting your Synergy 2150
to a switchboard/PBX, you may need
to change the dialling mode from
TONE to PULSE.
To change the dialling mode
The dialling mode is set to
TONE when the product is
supplied.
To change to PULSE.
Options
Until display flashes
Del
setting
Options
Enter the 4-digit base station
PIN
PIN. Original setting 0000.
Options
Until the display flashes
Del
Dial mode.
Options
Until the display flashes
Del
Pulse.
Options
To confirm setting.
45
Base
.
To change the network
connection
When connected to some
switchboards/PBX's you
may encounter higher than
normal speech levels. If this
is the case you can alter the
network setting from PSTN
to PBX which would reduce
the levels to normal.
Options
Until the display flashes
Del
Base setting.
Options
Enter the 4-digit base station
PIN
PIN. Original setting 0000.
Options
Until the display flashes
Del
Network.
Options
Until PBX is flashing.
Del
Options
To confirm the setting.