BT Synergy 2150 User Manual page 21

Dialling mode
Your Synergy 2150 is preset
to TONE dialling which most
modern exchanges use.
On some older exchanges or
PBX's it may be necessary to
change the dialling mode to
PULSE.
Options
Until the display flashes
Del
BASE SETTING.
Options
Enter the 4-digit base station
PIN. Original setting 0000.
PIN
Options
Until the display flashes
Del
DIAL MODE.
Options
Until the display flashes
Del
PULSE.
To confirm.
Options
Go to Tone
If you are in the PULSE
dialling mode then certain
services accessed by tone
dialling are not available.
During the call you can
change to TONE by pressing
Options
the OPTIONS
Use the UP
Del
arrows to scroll to the
Go to Tone command and
press the
Options
Operation of your keypad
after this will now be in
TONE mode. When the call
is completed you will revert
to PULSE dialling.
Go back
If during a call you have
selected a function using the
Options
OPTIONS
revert back to a normal
display without losing the
caller if you select the option
Go back.
Use the UP
Del
arrows to scroll to the
Go Back command and
press the
Options
to confirm.
button.
and DOWN
button.
OPTIONS
button, you can
and DOWN
button
OPTIONS
16