Remote Access - BT Synergy 2150 User Manual

Remote access

You can switch on and operate your
answering machine from any other
TouchTone telephone to play your
messages and memos.
To keep your messages private, you
will need to enter your 4-digit security
PIN code before you can access your
messages.
The pre-set security code is 0000 but
it is advisable to change this, see page
26 to change your security code.
You can keep a record of the new
number in the box printed in the front
of this guide.
Time Saver
If you have your ring count
set to 4 rings, then you can
tell if you have any new
messages before the machine
answers.
If the machine answers after
2 rings then you know you
have new messages. If it gets
to 3 rings, then you know
there are no new messages
and you can hang up, saving
you the cost of a call.
29
To turn answering machine on
via remote access
Call your phone.
After approx. 16 rings, the
telephone answer machine
will answer and announce
"Answer off ".
Press the
You will be prompted to add
your security code e.g. 0000.
PIN
You will hear "To play all
messages, press 2".
To switch on the answer
8
machine in answer record
mode, press the
To switch on the answer
9
machine in answer only
mode, press the
button.
8 button.
9 button.