Checklist; Checking Computer Information; Configuring Your Computer - Konica Minolta bizhub 658e Quick Manual

Table of Contents

Advertisement

3.2
Scan-to-Send function

Checklist

While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
File Path
User ID
Password

Checking computer information

Check the host address and user ID, and write them down.
1
Display the Properties window of the computer.
% In Windows 8.1/10, while pressing the [Windows] (
properties] in the displayed menu.
% In Windows 7, from the Start menu, select [Computer] - [System properties].
2
Check the computer name, and write it down in the Host address column of the checklist.
3
Open the command prompt.
% In Windows 8.1/10, while pressing the [Windows] (
mand Prompt] in the displayed menu.
% In Windows 7, from the Start menu, select [All Programs] - [Accessories] - [Command Prompt].
4
Check the user name, and write it down in the User ID column of the checklist.

Configuring your computer

Create a new folder, and enable the sharing settings.
0
Administrator privileges are required to perform this task.
1
Display the Network and Sharing Center window to configure a sharing setting.
% In Windows 8.1/10, while pressing the [Windows] (
Panel] - [Network and Sharing Center] - [Change advanced sharing settings] in the displayed menu,
then select the [Turn on file and printer sharing] check box.
% In Windows 7, from the Start menu, select [Control Panel] - [Network and Internet] - [Network and
Sharing Center] - [Change advanced sharing settings] then select the [Turn on file and printer shar-
ing] check box.
2
Create a new folder, and write down the folder name in the File path column of the checklist.
3
Configure the setting to share the folder created in Step 2. Right-click on the folder, then click [Proper-
ties].
4
Click the [Sharing] tab, and also click [Advanced Sharing].
5
Select the [Share this folder] check box, then click [Permissions].
6
Select [Everyone] from the [Group or user names:] list, then select all of the [Allow] check boxes.
bizhub 658e/558e/458e/368e/308e
Entry column
Host name or IP address to which the scanned data is sent
Name of the dedicated folder to receive the scanned data
User name required to log in to the computer
Password required to log in to the computer
You should not enter this column for security reasons.
) key, press the [X] key, and then select [System
) key, press the [X] key, and then select [Com-
) key, press the [X] key, and select [Control
3
Detail
page 3-15
page 3-15
page 3-15
Contact your sys-
tem administrator.
3-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 558eBizhub 458eBizhub 368eBizhub 308e

Table of Contents