Welcome Thank you for purchasing this machine. This [Quick Guide] describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual in a safe place where you can access it easily. Notations and symbols used in this manual WARNING WARNING...
The user's guides are intended for the following users of the system: Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides.
Configuration and Usage of this Guide Configuration and Usage of this Guide The User's Guide for this machine consists of the manuals below. When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide. For information about how to use the HTML User's Guide, refer to Section 5.1 "Good Use of the HTML User's Guide"...
AccurioPress 6136/6136P/6120 HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Web browser Windows 7 (Service Pack 1) Internet Explorer 11.x Firefox 54.x Chrome 59.x Windows 8.1...
Conventions used in this guide This guide describes product names and system configurations as follows. Product name Conventions used in this guide AccurioPress 6136 This machine: Indicates the entire system including options and AccurioPress 6120 functions. The main body: Indicates the main unit that provides print functions in this machine.
AccurioPress 6136/6136P/6120 Before Getting Started Turning the Power ON/OFF )Power supply This machine has two power switches: main power switch and sub power switch. NOTICE The main power switch is normally kept turned on. The main power switch must be turned on or off only when you start this machine for the first time or when you restart this machine.
Turning the Power ON/OFF Tips If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state. Warm-up processing takes approximately 7 minutes. )Turning the power off Turn off the sub power switch. The touch panel display is cleared, and the Power LED on the control panel changes from blue to orange.
AccurioPress 6136/6136P/6120 )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Description Power Save func- Auto Low Power Turns off the touch panel display to reduce the power consumption tion of this machine.
Page 12
Turning the Power ON/OFF Tips Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting], use either of the methods to configure a setting. If Power Save on the control panel is pressed for one second or more, either of Auto Low Power or Auto Shut OFF is enabled.
AccurioPress 6136/6136P/6120 Available Operations in this Machine Major functions of this machine )Print functions You can print data on this machine via the printer driver using the application software installed on your computer. You can configure a layout or finish setting by implementing a simple action when printing data.
Available Operations in this Machine )Scan functions You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), FTP server, or WebDAV server, and save it to the USB flash drive installed on this machine. In addition, you can give a scan instruction from a computer on the network to import the scan data to your computer.
AccurioPress 6136/6136P/6120 Application functions )Tone curve adjustment function (Color Centro) Color Centro is an application that enables efficient color management on your computer. To realize optimal printing results, you can adjust and specify tone curves. )Job management function (AccurioPro Print Manager) AccurioPro Print Manager is an application that enables job management of this machine.
Printing Flow Let's Make Prints This chapter describes a basic print workflow using this machine. First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements. Reference For information about application settings of this machine and adjustment procedures, refer to the HTML User's Guide.
AccurioPress 6136/6136P/6120 Step 4: Use the printer driver to print data Print original data through your computer. Check the application environment for original data in advance. This guide describes a procedure example of how to print data using the PS Plug-in driver from Adobe Acrobat Reader in a Windows 7 environment.
Printing Flow Click [Print]. Original data is printed, and printed sheets are output to the output tray of this machine. You can save print jobs on the HDD of this machine. If print jobs are saved on the HDD, you can make prints without reconfiguring settings the next time you print;...
AccurioPress 6136/6136P/6120 Basic Operations Loading Paper Loading paper into the main body tray The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper into Tray 1. Pull out the tray to load paper into.
Page 20
Loading Paper Align the side guide plates and rear guide plate to the paper. Align the stack of paper to the feed roller side of the tray. While pressing the side guide lock release lever, align both side guide plates to the paper. NOTICE Securely press the side guide plates and rear guide plate against the paper.
AccurioPress 6136/6136P/6120 Loading paper into the Paper Feeder Unit PF-709 The following describes how to load paper into an optional Paper Feeder Unit PF-709. The paper loading procedure is the same for Tray 3 to Tray 5. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide.
Page 22
Loading Paper Fix the position of the side guide plates. Place about 100 sheets of paper with the print side up. While pressing the side guide lock release lever, align both side guide plates to the paper, then fix their position to fit the size indicator on the top of the side guide plates.
Page 23
AccurioPress 6136/6136P/6120 Close the feed roller, then close the tray. Push the tray in until it locks into place. The amount indicator changes from in the tray information display area of the [MACHINE] or [COPY] screen. NOTICE Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or...
Paper Setting Paper Setting Specifying paper information for a tray Specify the required information (size, type, weight, and other values) for the paper loaded into a paper tray. If standard-size paper is loaded, its size is recognized automatically. To load custom-size paper, specify the required size.
Page 25
AccurioPress 6136/6136P/6120 Press [Paper Size]. Select one of the options under [Size Setting] to fit the paper loaded into the tray.
Page 26
Paper Setting Specify the size. [Standard]: Recognized automatically. In [Detect Size Setting], you can select the size to be detected. There is, however, a group of sizes having subtle distinctions, so that the machine cannot distinguish in the operation of size detection. To identify these sizes as one size so that they can be judged by the machine, you can select the size to be detected in [Detect Size Setting].
Page 27
AccurioPress 6136/6136P/6120 [Tab Paper]: Specify the paper size and the number of tabs. If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper].
Page 28
Paper Setting Specify other items, if necessary. Press [OK]. This returns to the [Paper Setting] screen. Press [Close]. This returns to the [MACHINE] screen. If you press [Paper Setting] on the [COPY] screen to specify the paper size, the screen returns to the [COPY] screen.
AccurioPress 6136/6136P/6120 Troubleshooting Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNING WARNING Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit, and Waste Toner Box) into an open flame. The hot toner may scatter and cause burns or other damage.
Page 30
Replenish and Replace Consumables When toner supply from the toner hopper also becomes empty, the message [No toner / Please add toner] is displayed and [Toner is used up Exchange toner bottle] is displayed in red in the [Consumable and Scrap Indicators] area. Follow the below steps to replace the toner bottle.
AccurioPress 6136/6136P/6120 Follow the on-screen instructions to replace a toner bottle. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,]. Attach the cap of a new toner bottle to the used toner bottle, then place it into the package. For the subsequent treatment, contact your service representative.
Page 32
Replenish and Replace Consumables Press on the upper-right corner of the touch panel or Help on the control panel to display the help message. If you press the yellow row in the [Consumable and Scrap Indicators] display area of the touch panel, the window shown in step 3 is displayed directly.
AccurioPress 6136/6136P/6120 )Replacing a waste toner box WARNING: Explosion The toner may ignite and cause a dangerous situation. NEVER throw the waste toner box into a fire. If the waste toner box fills up with waste toner, the message [Waste toner box is full Please replace the box] is displayed on the [MACHINE] screen, and the [Waste Toner Box] indicator changes to yellow in the [Consumable and Scrap Indicators] display.
Page 34
Replenish and Replace Consumables Press [Consumable/Scrap]. Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].
AccurioPress 6136/6136P/6120 Clearing Paper Jams How to view the animation guide If a paper jam occurs on this machine, the message [Paper JAM / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed on the screen.
Clearing Paper Jams )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step. Press [Illustration] on the [JAM Position] screen.
Page 37
AccurioPress 6136/6136P/6120 Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. Tips If the paper jam message has not been yet cleared even after all the jammed paper has been removed, the paper jam may have occurred in a place other than the one displayed. Check other places not displayed on the touch panel again.
If the Specified Paper is not Found If the Specified Paper is not Found If the specified paper is not loaded into a tray at the time of printing, the message [Please load designated xxx paper / To check details, touch [Confirm Details]] is displayed on the screen. To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size.
Page 39
AccurioPress 6136/6136P/6120 Replace paper into the tray, then press [Close]. Press Start on the control panel. Printing starts using the selected tray. 4-11...
If the Specified Paper is not Found )Forcibly printing using the loaded paper Press [Confirm Details] on the [MACHINE] screen. Select a tray with print paper loaded, then press [Forced Output]. Press Start on the control panel. Printing starts using the selected tray. 4-12...
AccurioPress 6136/6136P/6120 Cannot Send Data If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen. Check the free space on the HDD (image controller area). Start the Web browser. Enter the IP address of the image controller in the address bar, and then press [Enter].
When gray tones did not come out as expected When gray tones did not come out as expected Due to a change in the ambient temperature and humidity, a change in conditions of this machine, a variation of shades of colors caused by use of different type of paper, or print mode setting, the brightness or contrast of gray tones may differ from the tones you were able to obtain before, and images may not be printed as expected.
AccurioPress 6136/6136P/6120 Appendix Good Use of the HTML User's Guide Select the desired item on the top page (Home), then check the detailed contents. )How to use the search function The search field at the top of the manual can be used to search for the necessary information from the HTML User's Guide.
Name of each Component Name of each Component External components Name Description ADF (Dual Scan Document Feeder) Feeds multiple originals on a sheet basis to scan data. Even a 2-sided original can be scanned by one paper feed operation without reversing paper. This device cannot be installed on the Printer model.
AccurioPress 6136/6136P/6120 Name Description Service port (USB 2.0 Type A e 3) Used to connect devices such as an external storage medium (USB flash drive, USB-HDD), keyboard and mouse. This port is available for low-power devices only. Please provide an external supply of power for devices that require a large amount of power.
Page 46
Name of each Component Name Description Lever [M4] Opens rightward to allow withdrawal of the conveyance fusing unit for removal of mishandled paper. Drum unit Forms the image. Fusing unit Fuses toner onto paper. Side guide plate Aligned to the edges of loaded paper. Feed roller Feeds paper sheet by sheet to the printing unit.
AccurioPress 6136/6136P/6120 Control Panel Layout Name Description Keypad Enters numeric values. Reset Returns the copy conditions to the default settings. Power LED Lights up in orange when the main power switch is turned on, then turns blue when the sub power switch is turned on.
Page 48
Name of each Component Name Description Access Used to suspend the operation when user authentication or ac- count track function is activated and an authenticated user has used the machine. The screen for user authentication/account track is displayed to allow the machine operation only when the next user is authenticated.