Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 6
Attach the HANDLEBAR(5) to the UPRIGHT(2) with BUTTON HEAD BOLTS(M8x1.25x15mm)(45), LOCK
WASHERS(M8)(67), and ARC WASHERS(M8)(46).
STEP 7
Install two AAA batteries into the METER(11), the batteries are not included. See page 15 for detailed battery
installation instructions. Plug the EXTENSION WIRE(8) into the connecting wires of the METER(11), and
push the excess wires back into the UPRIGHT(2). Attach the METER(11) to the plate on the UPRIGHT(2)
with ROUND HEAD SCREWS(M5x0.8x12mm)(63). Plug the PULSE SENSOR WIRES(26) into the back
of the METER(11).
NOTE: Be careful not to damage the wires when attaching the METER(11).
STEP 8
Attach the WATER BOTTLE HOLDER(41) to the UPRIGHT(2) with WASHER HEAD SCREWS
(M5x0.8x12mm)(53).
11
67
46
45
5
8
26
63
41
2
53
11
Advertisement
Table of Contents
