Directed Electronics Matrix 2 Owner's Manual page 22

(automatic arming 30-seconds after the last door is closed).
If programmed for passive arming, a feature called Smart
Relocking will occur when the system is disarmed without
opening a door, so that the doors will automatically lock
when the system passively rearms.
➤ ➤
Arming/disarming confirmation siren chirps
➤ ➤
Auto-Lock/Auto-Unlock
vehicle doors will lock three seconds after the ignition is
turned on, and unlock when the ignition is turned off. If
your installer is programming the security system with the
Directed Bitwriter or a personal computer and the TechSoft
®
Programmer, ignition lock and unlock are independent
features and can be programmed separately.
➤ ➤ Passive door locking (with passive arming) or
(only when arming with the transmitter). Passive
locking
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
➤ ➤
Panic mode
states have laws against siren capability in a moving vehicle.
➤ ➤
Forced passive arming
for passive arming and the forced passive arming feature has
been programmed on, the system will passively arm after one
hour, even if a protected entry has been left open. This
feature is useful if a vehicle door has been left ajar when
leaving the vehicle. Forced passive arming ensures that the
security system will be armed in every situation.
© 2001 directed electronics, inc.
or off: With this feature on, the
on
/disabled with the ignition on: Some
enabled
or off: If your system is programmed
on
or off.
on
active door
19