Panic Mode; Valet Mode - Directed Electronics Matrix 2 Owner's Manual

note: The Warning Zone response to lighter impacts is
bypassed if the system is armed using Remote Controlled
Chirp Muting. This ensures that no chirps will be emit-
ted by the siren in an area you want chirp-free. The sys-
tem is still fully capable of triggering. Only the Warning
Zone response is bypassed.
➜

panic mode

If you are threatened in or near your vehicle, you can attract atten-
tion by triggering the system with your remote! Just press
for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for the programmed siren
duration. To stop Panic Mode at any time, press
➜

valet mode

You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
© 2001 directed electronics, inc.
switch within 10 seconds.
again.
DRW-35
11