Transmitter Chirp Muting; Transmitter Sensor Disable - Directed Electronics Concept 550 Owner's Manual

the siren has been sounding, press
trigger and return the unit to the armed state. The system will not dis-
arm, but rather reset. This prevents you from disabling the system
should you wish to silence it without visually checking the vehicle. After
resetting the system, press

transmitter chirp muting

To temporarily turn off the arm or disarm chirps, use transmitter chirp
muting. Simply press
chirp(s) will be eliminated for that one operation only. The parking
lights will flash to confirm the arm/disarm command. If you want the
arm/disarm chirps turned off permanently, please refer to the User-
Selectable Features section of this guide.

transmitter sensor disable

To temporarily disable a sensor input, arm the system, press
twice and then
all warn away trigger zones one, three, and eight are bypassed. Press
the buttons again; the lights flash four times and both warn away and
full trigger zones one, three, and eight are bypassed until the system is
disarmed. This can be performed anytime the system is armed.
1. Arm the system.
2. Press
3. The lights will flash four times; all warn away zones are now
bypassed.
4. Transmit the sensor bypass channel again.
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
on the transmitter to stop the
again to disarm the system.
on the transmitter, and the confirmation
. The lights will flash four times and
twice and then .
9