Transmitter Functions; Standard Configuration - Directed Electronics Concept 550 Owner's Manual

transmitter functions

This system uses computer-based code learning to learn the transmitter
buttons. This makes it possible to assign any transmitter button to any
system function. The transmitter initially comes programmed with stan-
dard configuration, but may also be customized using the CliffNet
Wizard PC program. The buttons in all of the instructions in this manu-
al correspond to a standard configuration transmitter.

standard configuration

Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output A is controlled by this button.
Button
Silent arm and disarm is controlled by this button.
Button
Remote start is controlled by this button.
Button, then
Accessory B output is controlled by these buttons.
Button, then
These buttons activate SmartWindows.
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
Button
Button
5