Table of Contents
Advertisement
REMOVING THE RECHARGEABLE BATTERY
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled correctly.
•
The rechargeable battery must be removed from the appliance before it is scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Unplug the shaver.
2.
Using a small screwdriver, pry the front cover from the shaver (Fig. H).
3.
Remove the 4 screws located on the front of the shaver (Fig. I)
4.
Remove the rear cover (Fig. J).
5.
Pry the battery carrier and circuit board from the shaver body then cut the wires
(Fig. K-L).
•
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
•
Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
7
Advertisement
Table of Contents
