REMOVING THE RECHARGEABLE BATTERY
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled
correctly.
•
The rechargeable battery must be removed from the appliance before it is
scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Remove the shaver head (pull the head up and off).
2.
Using a small screwdriver, pry the front panel off the handle.
3.
Unscrew the 3 screws located on front of shaver.
4.
Using a small flat screwdriver, pry the front housing from the body.
5.
Unscrew the 6 screws to open the inner housing.
6.
Take out the circuit board.
7.
Disconnect the battery from the circuit board.
•
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
•
Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
7