Detail Trimmer; Removing The Rechargeable Battery - Remington X9 Manual

CARE FOR YOUR SHAVER
Care for your shaver to ensure a long lasting performance. We recommend you clean your
shaver after each use.
• Ensure your shaver is switched off before cleaning.
1. Open the shaver head by pressing the release button (Fig. C).
2. The head assembly will open (Fig. D).
3. Rinse under a tap to wash away hair trimmings.
4. Carefully brush away any hairs from the cutters.
5. Snap the head assembly closed.
Note: The individual cutters are designed to be permanently retained in the shave head and
flushed out with water. Do not remove the individual cutters for cleaning.

DETAIL TRIMMER

Lubricate the teeth of the detail trimmer every six months with a drop of sewing machine
oil.

REMOVING THE RECHARGEABLE BATTERY

We strongly recommend that a professional removes the rechargeable battery. Parts of the
shaver case, and tools have sharp edges and may cause injury if not handled correctly.
• The rechargeable battery must be removed from the appliance before it is scrapped.
• Disconnect the charging adapter before removing the battery.
1. Remove the shaver head (pull the head up and off).
2. Using a small screwdriver, pry the front panel off the handle.
3. Unscrew the 3 screws located on front of shaver.
4. Using a small flat screwdriver, pry the front housing from the body.
5. Unscrew the 6 screws to open the inner housing.
6. Take out the circuit board.
7. Disconnect the battery from the circuit board.
• Used batteries must be removed from the appliance and disposed of at an appropriate
official recycling/collection point.
• Do not attempt to operate the shaver once you have opened it.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE
7