Removing The Rechargeable Battery - Remington R4001 Manual

Rotary shaver
Table of Contents

Advertisement

REMOVING THE RECHARGEABLE BATTERY

We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled
correctly.
The rechargeable battery must be removed from the appliance before it is
scrapped.
Disconnect the charging adapter before removing the battery.
1.
Run the shaver until the motor stops.
2.
Unplug the shaver.
3.
Unscrew the 2 screws on rear housing (one is located under the trimmer).
4.
Pry off the rear housing and expose the battery.
5.
Lift the battery carrier and circuit board out of the shaver body then cut the tabs
holding the batteries to the circuit board.
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

R4Style series

Table of Contents