◦
Power switch off: audio signal muted
Tone Gen
Transmitter will generate a continuous test tone:
◦
Freq: The tone can be set to 400 Hz or 1000 Hz.
◦
Level: Allows for adjustment of the output level of the test tone.
Utilities Menu
Device ID
Assign a device ID of up to 9 letters or numbers.
Locks
Locks the transmitter controls and power switch.
◦
None: The controls are unlocked
◦
Power: The power switch is locked
◦
Menu: The menu parameters are locked
◦
All: The power switch and menu parameters are locked
Link Info
Displays the following information about the link between a transmitter and receiver:
◦
Not Linked: The transmitter is not linked to a receiver
◦
Linked: The transmitter is linked to a receiver. Select Unlink? to free the transmitter from the receiver link.
◦
Unlinked: The transmitter is not linked to a receiver
SL Test
ShowLink test tool to measure the boundaries of ShowLink coverage.
Marker
When enabled, press the enter button to drop a marker in Wireless Workbench.
Battery
Displays battery information:
◦
Battery Life: Runtime reported in bar display and time (hours:minutes)
◦
Charge: Percentage of charge capacity
◦
Health: Percentage of current battery health
◦
Cycle Count: Total of the number of charging cycles for the installed battery
◦
Temperature: Battery temperature reported in Celsius and Fahrenheit
Talk Sw
Press ENTER to add control from a talk switch. Press the button on the talk switch twice to complete the link.
Identify
When enabled, Identify flashes the transmitter icon in Wireless Workbench Inventory or Monitor tabs.
About
Shure Incorporated
11/21