Nokia 6066 User Manual page 14

N6066_UG_EN_FCC_060831.fm Page 13 Friday, September 1, 2006 11:26 AM
Remove the battery
1. After you have removed the back cover,
insert your finger into the finger grip.
2. Lift the battery upward from it's
compartment.
Note: Always switch off the device,
and disconnect the charger before removing the battery.
UIM (CDMA SIM) card installation
The User Identity Module (UIM), also called
the CDMA Subscriber Identity Module (SIM),
card and its contacts can be easily damaged
by scratches or bending, so be careful when
handling, inserting, or removing the card.
The UIM card slot is built into the mechanics,
located under the battery.
Before installing the UIM card, always make
sure that the phone is switched off and that
you have removed the cover and battery.
Keep all UIM cards out of the reach of small
children.
1. Remove the back cover and battery first.
2. Keep the beveled corner of the UIM card
facing up and matching along the
corresponding beveled corner of the card
holder.
S e t u p y o u r p h o n e
13