DWL-8200AP User's Manual
Device Configuration > Multi-SSID (continued)
Group ID:
Encryption:
Security:
Key Index:
Key Type:
Key Size:
WEP key:
Note: If the Master sets security to key 1, then key 1 can not be used. This leaves
three Multi-SSIDs that can use security per band. The final result will mean that for
each band, four Multi-SSIDs will be without security.
Note: If Main Master SSID supports WPA or WPA2, then the guest is not allowed to
set security.
D-Link Systems, Inc.
You can assign a value to group all of the SSIDs to each other. The
Group ID is 0 by default, which is also considered Primary SSID. Use
Group ID 0-15 for "Main", or use Group ID 16-30 for "Guest".
Enable or Disable encryption on the selected device(s).
Select either None, Open System, or Shared Key.
Select which defined key is active on the selected device(s).
Select HEX or ASCII.
Select 64-bit, 128-bit, or 152-bit.
Enter a string to use as the key.
Using the AP Manager
84