D-Link DWL-8200AP Manual page 71

DWL-8200AP User's Manual
Device Configuration > Security > Open/Shared/Both
The Security tab contains the WEP configuration settings on the initial page. If you select
WPA as the authentication type, an additional tab will appear with the WPA configuration
options based on your selection.
Authentication
Encryption:
Active Key Index:
Key Values:
D-Link Systems, Inc.
Select from the pull-down menu the type of authentication to be used
Type:
on the selected device(s). In this example you may select Open,
Shared, or Both.
Enable or Disable encryption on the selected device(s).This option
will only be available when security is set to Open or Both.
Select which defined key is active on the selected device(s). This
option will only be available when security is set to Open, Shared,
or Both.
Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX
or ASCII) and then enter a string to use as the key. The key length
is automatically adjusted based on the settings you choose. This
option will only be available when security is set to Open, Shared,
or Both.
Using the AP Manager
71