D-Link AirPremier DWL-2200AP Manual page 51

Troubleshooting (continued)
8. Resetting the DWL-2200AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose to
Reset the DWL-2200AP to the factory default settings.
To hard-reset the D-Link DWL-2200AP to the Factory Default Settings, please do the
following:
Reset
Locate the Reset button on the back of the
DWL-2200AP
Use a paper clip to press the Reset button
Hold for about 5 seconds and then release
After the DWL-2100AP reboots (this may take a few
minutes) it will be reset to the factory Default settings
51