D-Link AirPremier DWL-2200AP Manual page 11

Getting Started (continued)
Setting up
an example
of a Wireless
Infrastructure
Network
For a typical wireless setup at home (as shown above), you may do the
following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to the DI-604 Router. (See the printed Quick
Installation Guide included with your router.)
Connect the Ethernet Broadband Router to the PoE base unit. (See the printed
Quick Installation Guide included with the DWL-2200AP.)
Connect the DWL-2200AP to the PoE base unit. (See the printed Quick
Installation Guide included with the DWL-2200AP.)
If you are connecting a desktop computer to your network, install the D-Link
DWL-G520 wireless PCI adapter into an available PCI slot on your desktop
computer.
(See the printed Quick Installation Guide included with the network adapter.)
Install the drivers for the D-Link DWL-G650 wireless Cardbus adapter into a
laptop computer.
(See the printed Quick Installation Guide included with the DWL-G650.)
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
5 5 5 5 5
7 7 7 7 7
Access Point Mode
11
1 1 1 1 1
6 6 6 6 6