D-Link AirPremier DWL-2200AP Manual page 36

Using the AP Manager (continued)
Device Configuration>Security
The Security tab contains the WEP configuration settings on the intial page. If you select
WPA as the authentication type, an additional tab will appear with the WPA configuration
options based on your selection.
• Authentication Type: Select from the pulldown menu the type of authentication to
be used on the selected device(s).
Authentication Type
Open
Shared
Open/Shared
WPA-EAP
WPA-PSK
• Encryption: Enable or disable encryption on the selected device(s).
• Active Key Index: Select which defined key is active on the selected device(s).
• Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or
ASCII) and then enter a string to use as the key. The key length is automatically
adjusted based on the settings you choose.
Function
The key is communicated across the network.
Limited to communication with devices that share
The key is communicated and identical WEP setti
Used to authenticate clients via a server.
Does not utilize a server for authentication but use
and access point(s).
36