D-Link DSL-200 User Manual page 18

10. In the Setup Complete window, click Finish.
11. The DSL Installer window asks you to plug in the Modem. Plug the rectangular
end (Type A) of the USB cable into the USB port of your PC, and then plug the
square end (Type B) of the USB cable into the USB port of the ADSL Modem. The
USB Modem will be detected and messages will be displayed as the modem
software is installed.
Note: For Windows 2000 applications, the "Digital Signature Not Found" window will appear again.
Click Yes to allow the installation to continue.
For Windows 2000 applications, the "Found New Hardware Wizard" window indicates
the modem has been installed and asks you to reboot the system to have new settings
take effect. Click Finish.
12. You now need to restart the computer to complete the installation of the driver.
You may do this now by clicking Yes.
A new icon (two arrows) will appear in the System Tray on your desktop.
18