Table of Contents
Advertisement
Registering a new Diverse
handset with the base unit
Up to six handsets can be registered and
operated from the Diverse 1015 base unit. The
system allows you to make internal intercom
calls between two handsets while a third is
making an external call.
Each additional handset you purchase must be
registered at the base unit.
Diverse handsets
Diverse additional handset - Item Code: 871038.
Diverse Executive handset - Item Code: 871073.
Diverse 1000 handset. Item Code: 870915.
Please note. Diverse 1000 handsets will
not work on Diverse 1010 and 1015
base units.
To register a handset
The handset must be switched OFF.
At the base unit:
Press and hold down the green paging
•
button until you hear the continuous beeps
(after about 10-15 seconds).
You now have up to 1 minute to register the handset,
during which the beeps will continue.
At the handset:
1
PWR
Press and hold down the
•
with the
button until the display
PWR
shows
and flashing
1–
Enter the 4 digit system code. (Factory
•
setting is 0000. To change it see page16.)
#
Press the
button. The beeps stop after
•
about 10 seconds, and the display shows all
the available handset numbers.
Select and enter one of these numbers.
•
This is now the handset's internal number
and it is registered with the base unit.
Registering a new Diverse
handset with the base unit
button together
1
.
44
Advertisement
Table of Contents
