Remote Access - BT Diverse 1015 User Manual

Remote operation of your
Diverse 1015

Remote access

You can operate your answering machine
from any registered handset and any other
external Touchtone
From a Diverse handset
9 WXYZ
INT
Press the
• INT
Press the button. The voice announces the
• 9
current mode of operation, the number of
messages on the memory and, if applicable,
the day and time.
If another handset is making an external call
you cannot access the answering machine from
your handset.
Please note
Once you have entered the system code correctly, you
are ready to operate your answering machine. If you
do not operate the machine for 160 seconds, the
voice says, 'Please confirm'. You then have a further
8 seconds before the machine disconnects your call.
33
TM phone.
EITHER
STO MEM LNR
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 PQRS 8 TUV 9 WXYZ
0
RCL INT PWR
button
OR
From another external
Touchtone TM
phone
Dial your Diverse 1015 phone
•
number.
When the Diverse 1015 takes your call,
•
enter the system code. (This must be
dif ferent from the factory setting of
0000. See page 16 on how to change
your system code.)
You hear a beep and the voice announces
the current operating mode, the number of
messages stored and, if applicable, the time
and day.
If you make a mistake entering the system code,
you hear the voice announce, ' Faulty PIN'. You
can try again.
After three incorrect entries, the answering
machine disconnects the call.