Ipsec Vpn Configuration - D-Link DFL-1100 Installation Manual

DFL-1100 Installation Guide

IPSec VPN Configuration

The VPN configuration screen can be found by going to the Firewall tab and selecting the VPN button.
IPSec VPN Between a Client and an
Internal Network
Users can connect to the main office internal network from any Internet
connection. Communication between the client and the internal
network takes place in an encrypted VPN tunnel that connects the
DFL-1100 and the roaming users across the Internet. The client can
connect to an internal network or the DMZ network.
Creating a Roaming Users VPN Tunnel
1. Click on the Add new
2. Enter a name for the new tunnel in the name field. The name can
contain numbers (0-9), upper and lower case letters (A-Z, a-z),
dash (-), or underscore (_).
3. In the Local Net field, enter the local network that your roaming
VPN clients will be connecting to.
4. Choose the authentication type, either PSK (Pre-shared Key) or
Certificate-based. If you select PSK, be sure the clients use exactly
the same PSK.
5. Select Roaming Users as the Tunnel Type.
6. Click Apply to apply the settings or click Cancel to disregard the
changes.
link.
20
IPSec VPN Configuration