Appendix I: Telnet Configuration (Optional) - D-Link AirPremier DWL-1750 Manual

Appendix 1:
Telnet Configuration
The DWL-1750 is designed to operate as shipped from the factory without any special
set-up. However, it has many options and parameters that can be changed if users
have special requirements. Most of the management functions can be accessed using
TCP/IP protocol; it can also be configured by Telnet/Console.
Configure the DWL-1750 using a Telnet session on a wired LAN attached computer.
To use the Telnet session, you can simply open a Telnet window using the IP
address that has been assigned to the DWL-1750.
1. Go to Start >Run; open the Run dialog box.
Enter telnet 192.168.0.50 (the default terminal type of Telnet is VT100; the
default Ethernet IP Address of the DWL-1750 is 192.168.0.50).
Click OK.
telnet 192.168.0.50
55