D-Link AirPremier DWL-1750 Manual page 30

Using the Configuration Utility (continued)
Tools > Firmware
You can upgrade the firmware here. Make sure the firmware you want to use has been
copied into the TFTP folder on the computer in your network which has the TFTP software
installed. Remember the names of the firmware upgrade files. Please check the D-Link
support site for firmware updates at http://support.dlink.com. You can download firmware
upgrades to your hard drive from the D-Link support site.
Firmware Upgrade-
TFTP Server IP-
Program
Firmware-
Web image
Firmware-
Apply-
There may be new firmware for your DWL-1700AP available on the D-Link support
website.
Click here to check for a firmware upgrade on our support site.
You will need to download and install TFTP software on a computer in your network.
Copy the firmware upgrade file that you downloaded from our website into the TFTP
folder on your hard-drive
Click on the link in this screen to find out if there is an updated
firmware; if so, download the new firmware to your hard drive
and into the TFTP server folder.
Input the IP Address of the computer on the network which has
the TFTP software installed.
Enter the name of the program firmware update file that you
downloaded into the TFTP folder.
Enter the name of the Web image firmware update file that you
downloaded into the TFTP folder.
Click Apply to update the firmware.
.
30