D-Link AirPremier DWL-1750 Manual page 23

Using the Configuration Utility (continued)
Advanced > Firewall
Firewall Rules is an advanced feature that is used to deny or allow traffic that passes
through the DWL-1750. The Firewall Rules that you create will appear in the list at the
bottom of the page. Please be sure to Click Apply, after you have made changes or
additions.
Firewall Service-
Rule Name-
Schedule-
Action-
Priority-
Protocol-
IP-
Netmask-
Port-
Apply-
Select Enabled to enable the Firewall Service feature
Enter the name for the Firewall Rule
To schedule select OFF or ON
Choose to Accept or Deny the Firewall Rule
Select the Priority status of the Firewall Rule
Select the Protocol of the Firewall Rule
Enter the IP Address of both the Source and the Destination of
the Firewall Rule
Enter the Subnet Mask of both the Source and the Destination
of the Firewall Rule
Enter the Port of both the Source and the Destination of the
Firewall Rule
Click Apply if you have made any changes
23