BT FREESTYLE 6300 User Manual page 7

6488 BT Freestyle 6300 UG [4]
2. Remove the battery compartment cover and insert the
2 x AAA NiMH batteries (supplied) into the handset.
Slide the battery compartment cover back into place.
3. Charge the handset for at least 16 hours by placing it on
the base. The red
up and remains lit while the handset is on the base (even
when the battery is fully charged). When the handset is
fully charged the display will show a full battery
4. After 16 hours, plug the telephone line cord into your BT
Freestyle 6300 base and the other end into the wall socket.
Your BT Freestyle 6300 is now ready for use.
18/10/04
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
Charging indicator on the base lights
Line cord
11:02 am Page 7
Talk/Standby time
Under ideal conditions, fully charged
handset batteries should provide up
to 10 hours talk time or 100 hours
standby on a single charge.
Battery performance
Please note that new NiMH
batteries do not reach full capacity
until they have been in normal use
for several days.
To keep the batteries in the best
condition, leave the handset off the
charger for a few hours at a time
(after the initial 16 hour charge).
Running the batteries right down
at least once a week will help them
last as long as possible.
icon.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, so reducing the
talk/standby time of the handset.
Eventually they will need to be
replaced. New batteries can be
obtained from the BT Freestyle
Helpline 0870 605 8047.
Battery low warning
When the battery charge is low the
display will show Battery Low and
an empty battery icon
also hear the battery low warning
beep. Place the handset back on
the base to recharge.
Getting started 7
. You will