Table of Contents
Advertisement
6488 BT Freestyle 6300 UG [4]
Cannot dial out or receive calls
The batteries may need recharging.
n
Has there been a power cut? If so, place the handset
n
back on the base for 10 seconds and try again. If it still
does not work disconnect the batteries and mains power
for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
You may need to change the dial mode from tone to
n
pulse, see page 46.
If you are connected to a switchboard, check whether
n
you need to dial an access code.
Handset does not ring
The ringer volume may be switched off, see page 40.
n
Make sure the handset is registered to the base, see
n
page 48.
icon is flashing
Is the handset registered correctly to the base?
n
See page 49.
Check that the handset is within range of the base.
18/10/04
11:02 am
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
Page 55
Help
55
Advertisement
Table of Contents
