Table of Contents
Advertisement
6488 BT Freestyle 6300 UG [4]
Additional handsets & bases
You can use up to four additional handsets with your BT
Freestyle 6300 – all using the same phone line. This allows
you to expand your phone system without the need to
install telephone extension sockets for each new handset.
Your BT Freestyle 6300 handset can also be registered
with up to 4 DECT compatible bases. You can then select
the base you would prefer to use.
Each additional handset is supplied with its own charger
and user guide, but the following information will tell you
how to register and use an additional handset with your
BT Freestyle 6300.
Register a handset to a base
1. At the handset: Select Menu, scroll
Registration
and select OK.
2. The display shows
3. The display shows
you want to register the handset to, using the keypad.
4. The display shows
0 0 0 0 ), then select OK.
5. At the base you want to register to, press and hold
for approximately 5 seconds until you hear a confirmation
beep, then release
(X being the number of the base selected).
Search X
The base display will show
18/10/04
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
or
Register H/S
. Select OK.
. Enter the base number
Base 1 2 3 4
PIN?
. Enter your system PIN (default:
. The handset display will show
.
Registration
11:02 am
Page 49
IMPORTANT
Before registration, make sure the
to
handset batteries are fully charged
and that you are close to the base.
49
Advertisement
Table of Contents
